Tracking

Step 1

UNDO BOLTS

Loosen Nuts on the underside of the mounting bracket so they slide in the 3 slots.

Step 2

ADJUST MOUNTING PLATE

Slide bracket outwards to full extension.

Step 3

TEST FIT ARMREST

Mount Armrest onto the top of the door card. The bracket should slot into the space between the window and the doorcard. Then slide to desired position.

Step 4

Tighten Nuts

Tighten nuts for a secure fit.

Step 6

INSTALL BADGES

The “SURF” Badges can be found inside the cup holder under the silicon sleeve. Remove the backing tape and install on both sides in the recessed slot, or leave off for a more minimal look.